MKL17Z64VLH4 NXP USA Inc
We’d like to share the details of this part MKL17Z64VLH4 NXP USA Inc today if you have it in some of your PCB assembly project.
Peripherals
- One UART module supporting ISO7816, operatingup to 1.5 Mbit/s
- Two low-power UART modules supportingasynchronous operation in low-power modes
- Two I2C modules supporting up to 1 Mbit/s
- Two 16-bit SPI modules supporting up to 24 Mbit/sfor SPI1 and 12 Mbit/s for SPI0
- One FlexIO module supporting emulation ofadditional UART, SPI, I2C, I2S, PWM and otherserial modules, etc.
- One 16-bit ADC module with high accurate internalvoltage reference, up to 20 channels and up to 818ksps at equal to or less than 13-bit mode
- High-speed analog comparator containing a 6-bitDAC for programmable reference input
—-
Kinetis KL17 Microcontroller(48 MHz ARM® Cortex®-M0+ and 32/64 KB Flash)
The KL17 series is optimized for cost-sensitive and battery[1]powered applications requiring low-power general purposeconnectivity. The product offers:
- Embedded ROM with boot loader for flexible programupgrade
- High accuracy internal voltage and clock reference
- FlexIO to support any standard and customized serialperipheral emulation
- Hardware CRC module
- Down to 46 µA/MHz in very low power run mode and 1.68µA in stop mode (RAM + RTC retained)
Please feel free to contact us if you are looking for one stop service supplier
Memories
- 32/64 KB program flash memory
- 8/16 KB SRAM
- 16 KB ROM with build-in bootloader
- 32-byte backup register
Core Processor
- ARM® Cortex®-M0+ core up to 48 MHz
System
- 4-channel asynchronous DMA controller
- Watchdog
- Low-leakage wakeup unit
- Two-pin SWD (serial wire debug) programming and debug interface
- Micro trace buffer
- Bit manipulation engine
- Interrupt controller
Clocks
- 48 MHz high accuracy (up to 0.5%) internal referenceclock
- 8 MHz high accuracy (up to 3%) internal referenceclock
- 1 kHz reference clock active under all low powermodes (except VLLS0)
- 32–40 kHz and 3–32 MHz crystal oscillator

